Laboratory presses MP250

Laboratory presses MP250
The laboratory presses are available as analogue models with pressure gauge or as digital models with digital pressure display. MP150 is ideal for IR spectroscopy, for 13 mm diameter press dies. MP250 is used in RFA analysis to form tablets with a diameter of 32 mm or 40 mm. For smaller press dies or more accurate pressure control, the MP150D or MP250D digital models are suitable.

The MP150D and the MP250D can be equipped with a serial interface (optional). In addition, an individually programmable pressure limitation (optional) is available for setting the desired maximum pressure. Further pumping then does not build up higher pressure beyond the set value. This is especially useful if the sample should always be pressed with the same pressure. This makes every pressing process easy to control and reproduceable.
-Manual valve for controlled pressure reduction
-Keeps pressure stable for several hours
-Integrated splinter protection
-Integrated pressure control valve
-Press dies available from 3 to 50 mm
-With connection for Vacuum pump

Please order press dies separately.
With pressure gauge (MP250) or digital pressure display (MP250D). Press for up to 25 tons pressure. Recommended for press dies up to 50 mm.
Specifications
Pressure gauge Ø:
Pressure: 100 mm
25 t
Resolution: 0.5 t / 0.01 t
Width between pistons: 150 mm
Clear width min. / max.: 73 mm / 185 mm
Spindle diam.: 45 mm
Spindle path: 112 mm
Piston diameter / Stroke: 107 mm / 22 mm
Dimensions (H min. / max. x W x D): 497 / 609 x 370 x 300 mm
Weight: approx. 51 kg
Power supply MP250D: ext. power adapter, 12 V

Tuotekoodi Valmistaja Nimi Type
6290216 54MP250
Maassen GmbH
25 tons manual press
1
MP250
6290217 54MP250D
Maassen GmbH
15 tons manual press
1
MP250D

Edustuksiamme

LLG tuoteluettelo